This Server Technology -48VDC online demo consists of a 2U horizontally mounted unit with 16 user manageable outlets (model number 4805-XLS-16). These 16 outlets may be controlled via a network IP or serial interface.
In the demo, the outlets are numbered AA1 for Outlet 1, AA2 for Outlet 2 and so on for outlets powered by input feed A. Outlets on input feed B are numbered AB1, AB2, AB3, etc.
Features of the Switched CDU Products
Control of cabinet equipment at remote locations, co-locations facilities and network operations centers
Reboot locked up remote network servers to provide a fully operational network around the clock
Two 100-Amp power input feeds support dual power supply networking equipment units
Sixteen individual power outlets protected by a GMT fuse (1/2 to 10A fuses available)
Optional temperature and humidity probes with 10-ft cords to allow sensors to be located in different locations
16 individual outlet current meters
SNMP traps provide automated alerts for power and environmental conditions
Additionally, event notification is available via Syslog and email
Secure remote power management; reboot individual or grouped outlets (SSL, SSH, Telnet, SNMP, RS-232)
Web Interface Demo
»Click here to begin HTML Demo
At the authentication page, enter the following:
Username: admn
Password: admn
Click on 'OK'
To logout, click on the link located in the navigation bar on the left of the screen.
Product evaluation checklist
In order to maximize the demo and fully understand all the features of the -48VDC Products check out the -48VDC product evaluation checklist
Telnet Connection Demo Web Interface Demo
To start the Telnet demo click on the link located below. This will load the Telnet application on your system.
»Click here to begin Telnet Demo
At the authentication page, enter the following:
Username: admn
Password: admn
Press 'Enter'
Because the Telnet applications differ between operating systems, these instructions are designed to cover the basic operations required to make this demo operate properly. General recommendations for all Telnet applications include having the Terminal Preferences set to VT-100/ANSI emulation and VT 100 Arrows.
To get a display of available commands, just press Enter at the 'Sentry' prompt, which will show:
Sentry -48VDC CDU Commands are:
| ON |
OFF |
REBOOT |
STATUS |
ISTAT |
ENVMON |
LOGIN |
LOGOUT |
| PASSWORD |
LIST |
CONNECT |
PING |
VERSION |
SET |
SHOW |
CREATE |
| REMOVE |
ADD |
DELETE |
RESTART |
|
|
To view the status of all the outlets, type 'status' at the 'Sentry:' prompt.
To turn an outlet off, type 'off' and the Outlet ID at the 'Sentry:' prompt. Example: off .aa1
To end a session type LOGOUT and press Enter.
Please note that changes made during the demo session may NOT be preserved when the session is ended.